SG800

The sensor is a Catalytic gas detection unit detects the presence of explosive gas such as Methane, LPG, Hydrogen, Freon, Chlorine, Hydrogen Sulphide, and other type of gas. (see user guide)

1st LEVEL, pre-alarm. Set at 13 % of L.E.L. The pre-alarm has available one relay

2nd LEVEL, main alarm. Set at 20 % of L.E.L. The alarm has available one relay

The more important news of this sensor is the capability to change the sensing element at the end of the life cycle directly from a technician. The sensor is managed by a microprocessor, which allows execution of a self-diagnosis and therefore an automatic calibration, in order to always have the maximum detection accuracy. The self-calibration means the probe adapts in harsh and variable temperature environments, avoiding false alarms due to anomalous events.

Test: to perform a precise and self-certified test, use the TS1008 instrument, which also serves to carry out the annual check.

Primary power supply: 12 ÷ 24 VDC ± 10%
Absorption: 1.5 W max @ 13.8V
Pre-alarm relay: 10 A SELV
Changeover relay Alarm: 10 A SELV
Failure Relay: 10 A SELV
Signals: green LED regular function, yellow Fault light, red Alarm light
Sensor: See table below
Sensor replacement: Autonomously
Measuring range: from 0 to 100% of the LIE
Output signal: 4 ÷ 20 mA on 220 Ohm
1st alarm threshold: 13% of the LIE
2nd alarm threshold: 20% of the LIE
Test socket for: TS1008
Compatible ECUs: The whole Beinat series
Working temperature: 50 ° C
Cont. And Protection: Aluminum – IP66
Dimensions: 100x100x60
Package Dimensions: 197 x 122 x 67
Weight: 550 grams approx.