RGX100²

The household gas detector RGX1002 detects through the catalytic sensor , the presence of explosive gas such as Methane or LPG. The detector is tested and calibrated to 10% of L.E.L. Through the built-in relay, the RGX100/2 can activate: solenoid valves, sirens, and any other device alarm. A series of technical features make this gas detector extremely versatile, reliable, accurate, and safe. Through an internal jumper, it is possible to select the relay impulse functioning, to connect manual reset solenoid valves, or the continuous functioning, to activate class “A” solenoid valves and sirens.

The detector is complete with a special circuit that controls the catalytic sensor’s efficiency level, and signals any possible fault. The enclosure with IP42 degree of protection can be installed either on the wall or on a 503 flush-mounted box.

Primary power supply: 230 VAC 50 Hz
Consumption: 3.1W
Voltage-free deviation alarm relay: 10A 250V resistive
Insulation type: Class II
Type of gas detected: Methane with model for natural gas, LPG with model for LPG gas
Detection sensor: Catalytic
Alarm intervention: at 10% of the LIE
Equipment accuracy: 1% FS
Sensor faults detected by the Fault circuit: interruption, short circuit or decay
Test phase duration: 60 seconds
Visual and acoustic alarm signals via: LED diode and Buzzer 85 dB at 1 m
Selection of the Relay working mode: via Jumper
Test buttons: built-in
Solenoid valve control: class A or class B
Minimum and Max. Operating temperature: from -10 to +40 ° C
Minimum and maximum operating humidity: less than 90% R.H.
External protection degree: IP42
Dimensions: 120x80x37