BX316XP

The control unit has been designed and built according to the European Standard to verify the presence of toxic, explosive gas and Oxygen  in a versatile and innovative way in the following way: to connect in the traditional way from 4 to 20 mA 16 remote conventional sensors for one zone, or divisible into two zones with 8 conventional probes for each zone. The control unit has two versions: the DIN rail 9 modules version and the box version (BOX KAC019) 

The control unit features two hazard levels

1st LEVEL, pre-alarm. This data is variable. The technician can modify pre-alarm intervention for every sensor according to the type of plant to be controlled.

The level can be selected from 3% to 16% of L.E.L.

2nd LEVEL, general alarm. it is set to 20 % of L.E.L. or 300ppm”

The control unit is equipped with two general alarm relays with/without Positive Safety Switch to enable further independent control of two solenoid valves.

Suitable for industrial environments and in underground car parks

Primary Power Supply Version BX316: 15 V.cc

Secondary power supply from battery Max 2.2 Ah: 12.7 V. cc
Max 2.2 Ah Battery Charger: Checked
Absorption: 30 W in alarm
Conventional Probes: Max 16
Catalytic, Electrochemistry, Semiconductor, Pellistor
Pre-alarm threshold Selectable for each probe from 3 to 18% LEL
Explosive alarm threshold: 20% of the LEL and 300ppm
Input signal: 4 ÷ 20 mA on 150 Ohm
Accuracy: 1% FS
Display: 4 rows 20 columns
Positive Safety: Selectable
Pre alarm output relay: ON – OFF
Alarm output relay: Exchange
Failure relay: ON-OFF
Silencing external siren, and Buzzer: via software
Manual alarm signaling: incorporated
Working temperature: -10 ° C ÷ + 60 ° C
Dimensions BXI316: 158x90x58 mm 9 modules
Package Dimensions: 197x122x67 mm
Weight: 400 grams approx.
Degree of protection: IP20